Toshiba SD-25VLSR Service Manual page 10

One-Touch Timer Recording (OTR)
The one-touch timer recording feature Preparation
provides a simple and convenient way • Turn ON the TV and set to the video input mode.
to make a timed recording. • Press VCR to select the VCR mode. (The VCR indicator will
light.)
1
2
3
4
To Extend the Recording Time
Press REC/OTR repeatedly until the
Note:
desired time appears on the display.
If the tape supply has not sufficed for OTR
recording, the clock symbol ( ) will blink
at the tape-end and then VCR mode will
change to DVD mode.
In this case, press TIMER REC to cancel
the blink or press EJECT on the DVD/
To stop the OTR
VCR to remove the cassette tape.
Press STOP.
32
Timer-Recording
5
Press ENTER to accept them.
To enter other pro-
23 MON 13:30 14:30 1
------ --:-- --:-- --
grams, repeat steps
------ --:-- --:-- --
------ --:-- --:-- --
2 through 5.
------ --:-- --:-- --
------ --:-- --:-- --
------ --:-- --:-- --
• To return to the
------ --:-- --:-- --
normal screen,
SELECT : / ENTER
press VCR MENU EXIT : MENU
twice.
6
Press TIMER REC. The clock symbol ( ) will
appear on the display and the DVD/VCR stands by
for recording. At the same time, VCR mode will
change to DVD mode automatically. You can use
DVD even if the VCR is in the Timer recording mode.
If you do not use the DVD, turn the power off.
• If the clock symbol ( ) blinks in the display in
spite of the pressing of TIMER REC, the cassette
may not have been loaded yet. (see page 24)
• If the cassette is ejected in spite of the pressing
of TIMER REC, the erase prevention tab of the
cassette may have been removed. (see page 24)
Notes:
• In case of the timer recording from the scart socket,
proceed as follows: In step 4 press or repeatedly
until the "CH" line blinks. Then press AUX repeatedly
until "AV1" or "AV2" or "AV3" appears.
• If the clock symbol ( ) blinks when the timer recording
ended, the TV program has not been completely
recorded because of an insufficient tape supply. Press
TIMER REC to cancel the timer program or press
EJECT on the DVD/VCR to remove the cassette tape.
• During timer recording standby mode, the VCR mode
cannot be selected. To use the VCR, press TIMER
REC at first, then press VCR to change to VCR mode.
After you use the VCR, press TIMER REC again to put
the VCR into timer recording standby mode.
Timer Recording Special Case
Weekly (e.g. WKL-TUE: each Tuesday) or daily (e.g.
MON-SAT: Monday to Saturday) Timer recording
Follow the procedure for timer recording on both pages
before. At picture 3 press or repeatedly until the
desired setting appears. Then press . When you
press or repeatedly, the indicator at DATE will
change as follows, in case today is Friday.
One month later
minus one day
SUN-SAT 25 FRI ..... 24 SUN WKL-FRI
MON-SAT MON-FRI WKL-THU.....WKL-SAT
TIMER REC SET
DATE WKL-WED
START
11:30
- - : - -
END
MON-SAT = everyday from CH 2
SPEED SP
Monday to Saturday
SELECT :
WKL-SAT = each Saturday
SET : / 0—9
EXIT : MENU
34
Load a blank cassette tape with the erase
prevention tab intact. (The DVD/VCR will
automatically turn on.)
VCR
Select the program(e.g.29) you want to record with CH +/– or 10
number buttons.
1~9 : e.g. 5 = press "5"
VCR
10~80 : e.g. 29 = press "2" and "9".
If a recording in Long Play mode
is intended, press SP/LP to dis-
play "LP".
00:00:00 LP
Press REC/OTR twice. The recording will start and stop after 30
minutes. Each additional press of
REC/OTR will increase the record-
ing time for another 30 minutes up
to a maximum of 6 hours (See table
below).
INDEX
VCR
REC
"REC" will keep blinking
in the display.
1:00 1:30
Recording 0:30
3:00
6:00 5:00 4:00 2:00
If REC/OTR is pressed once during the recording, the remain-
ing time appears on the screen. When pressed again, the re-
cording time is extended to the nearest 30-minute interval.
OTR 1 : 30
In case of Timer programs-overlapping
Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
LP
-
- time has priority over the next recording time as
-
-
shown in the diagram below.
-
-
-
8 : 00 9 : 00 10 : 00
Program 1
Program 2
Deleted Parts
Program 3
Non Recorded Portion Parts
Recording
Prog.1 Prog.2
Control Settings
Notes:
• The daily/weekly recording can be made continuously until
the recording is canceled or the tape reaches the end.
• During timer recording the automatic rewinding mecha-
nism does not function.
Confirmation / Cancellation of the Timer
Recording
1
If the Timer has been activated, now press TIMER
REC to deactivate the Timer. The clock symbol (
will disappear. Then press VCR to change to VCR
mode.
2
Press PROGRAM. All the 8 Timer memories will
appear.
15 TUE 17:30 18:00
23 MON 13:00 14:30
25 WED 12:15 13:00
------ --:-- --:--
------ --:-- --:--
------ --:-- --:--
------ --:-- --:--
------ --:-- --:--
SELECT : / ENTER
CLEAR : CANCEL
3
To cancel Timer program: Press or
the written line. Then press CANCEL. This line is
now canceled.
------ --:-- --:--
23 MON 13:00 14:30
25 WED 12:15 13:00
------ --:-- --:--
------ --:-- --:--
------ --:-- --:--
------ --:-- --:--
------ --:-- --:--
SELECT : / ENTER
EXIT : MENU
4
Press VCR MENU (or PROGRAM) repeatedly until
the TV-picture appears.
Timer recording can be programmed
on the TV-screen with the remote con-
trol. The built-in timer allows automatic
unattended recording of up to 8 pro-
grams within 1 month.
OTR 0:30
CH 29
CH 29
Note:
In the event of a power failure the data of
the automatic recording will be maintained
in the built-in memory for about 30 min-
utes. Also, the clock will continue to run for
this period of time. Thereafter the data will
be deleted. When the power resumes, the
time display will change to "--:--" that the
timer setting will have to be set.
This DVD/VCR is capable of recording
sound in Hi-Fi system. The recording
will be performed automatically.
NICAM STEREO broadcasts are
recorded in its original sound system
regardless of the setting. If you wish
to record NICAM programmes, select
NICAM "AUTO" as follows.
11 : 00
And, this DVD/VCR can also receive
and record German A2 stereo pro-
gram. The tape recording is always
both in Hi-Fi and in MONO on the
standard longitudinal track. In case of
Prog.3
bilingual TV programs always the two
audio channels will be recorded.
)
7 SP
1 LP
4 SP
-
--
-- -
-- -
-- -
-- -
EXIT : MENU
to select
-- -
1 LP
4 SP
-- -
-- -
-- -
-- -
-- -
Note:
When listening to a stereo broadcast or
playing back a tape Hi-Fi recorded in
stereo, you have to connect the DVD/
VCR with the stereo audio system or the
stereo TV. The sound which is output
from the RF OUT jack is monaural.
Timer-Recording
Preparation
• Turn ON the TV and set to the video input mode.
• Press VCR to select the VCR mode. (The VCR indicator will light.)
• Load a video cassette with the erase prevention tab intact. Make
sure with DISPLAY that the time and date are correct.(see page
31).
Example: Timer recording for channel 1, 13:00 to 14:30 with Tape
speed LP on timer program number 1.
1
Press VCR MENU. Press or
TIMER REC SET
to select TIMER REC SET.
AUTO REPEAT
Then press ENTER.
VCR SETUP
CHANNEL SETUP
SYSTEM SETUP
SELECT :
ENTER : ENTER
EXIT : MENU
2
Each line stands for one pro-
------ --:--
gram of the 8 memories. Select ------ --:--
------
--:--
one line with or . Then
------ --:--
------ --:--
press ENTER.
------ --:--
------ --:--
------ --:--
SELECT :
EXIT : MENU
3
Set the desired date with or
TIMER REC SET
or 10 number buttons.
DATE 23 MON
Then press to accept it.
START
END
CH
SPEED SP
SELECT :
SET :
EXIT : MENU
4
Set the Starting time (13:00),
TIMER REC SET
ending time (14:30), channel
DATE
(1) and Tape speed (LP) in the
START
END
same way as the step 3.
CH
SPEED
• In case of an erroneous input
SELECT :
press to go back to before
SET :
step and enter again.
EXIT : MENU
....to be continued to next page
Stereo Recording and Playback
Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR to select the VCR mode. (The VCR indicator will light.)
NICAM stereo sound reception:
1
Press VCR MENU. Press or
TIMER REC SET
AUTO REPEAT
to select VCR SETUP.
VCR SETUP
Then press ENTER.
CHANNEL SETUP
SYSTEM SETUP
SELECT :
ENTER : ENTER
EXIT
2
Press or to select NICAM.
VCR SETUP
Then press / or ENTER to
COLOUR SYSTEM
select [AUTO].
NICAM
SELECT :
ENTER : ENTER
EXIT
3
Press VCR MENU repeatedly until the TV picture appears.
NICAM programmes are divided into 4 types as shown
below.
NICAM STEREO broadcast
"NICAM ST" illuminates when a NICAM
STEREO broadcast signal is received. NICAM ST
NICAM MONO A broadcast
"NICAM M1" illuminates when a NICAM
MONO A broadcast signal is received. NICAM M1
NICAM MONO A B broadcast
"NICAM M1/2" illuminates when a NICAM
NICAM M1/2
MONO A and MONO B broadcast signal is
received.
NICAM OFF
It will be displayed for the NICAM signal
when the "NICAM [OFF]" is selected in NICAM OFF
menu screen.
[OFF]
--:-- -- -
--:-- -- -
--:-- -- -
--:-- -- -
--:-- -- -
-- -
--:--
--:-- -- -
--:-- -- -
/ ENTER
11:30
--:--
3
/ 0–9
23 MON
13:00
14:30
1
LP
OK : ENTER
33
[OFF]
: MENU
[ AUTO]
[AUTO]
/
MENU
:
35