Rexing V5 Plus Quick Start Manual page 8

Step 3
Power on the Camera and Format the Memory Card
Power on the camera by connecting the charger to the car cigarette lighter and
camera. To ensure the V5 Plus records to your memory card properly and without
error. Before you start using a new memory card, you must format the card within
the camera using the format function. Always backup important data stored on the
memory card before formatting.
To format the memory card, make sure you have inserted your memory card, then
turn on the device by connecting to a power source. Press OK to stop recording.
Then press the MENU button twice to enter the System Setup Menu. Use the
and buttons and toggle to the Format setting. Press the OK button to confirm
the selection.
You may now disconnect from power. The camera will shut down after 3 seconds.
The camera should begin recording automatically the next time it is powered on.
7