Installing The Cover; Expansion Card; Removing Expansion Card - Dell OptiPlex 7050 Small Form Factor Owner's Manual

Installing the cover

1. Place the cover on the computer and slide the cover until it clicks into place.
2. Follow the procedure in

Expansion card

Removing expansion card

NOTE: Depending on the configuration you order, you may see either of the heat sinks as shown in the image below.
1. Follow the procedure in
2. Remove the cover.
3. Pull the metal tab to open the expansion card latch.
10 Disassembly and reassembly
After working inside your computer
Before working inside your computer.