Installing The Intrusion Switch - Dell OptiPlex 7050 Small Form Factor Owner's Manual

1. Follow the procedure in
2. Remove the:
a. cover
3. To remove the intrusion switch:
a. Disconnect the intrusion switch cable from the connector on the system board [1][2].
b. Slide the intrusion switch and lift it away from the computer [3].

Installing the intrusion switch

1. Insert the intrusion switch into the slot on the chassis.
2. Connect the intrusion switch cable to the system board.
3. Install the:
a. cover
4. Follow the procedure in
16 Disassembly and reassembly
Before working inside your
After working inside your
computer.
computer.