System Board; Removing System Board - Dell OptiPlex 7050 Small Form Factor Owner's Manual

4. Follow the procedure in

System board

Removing system board

NOTE: Depending on the configuration you order, you may see either of the heat sinks as shown in the image below.
1. Follow the procedure in
2. Remove the:
a. cover
b. bezel
c. 2.5–inch drive assembly
d. optical drive
e. heat sink
f. processor
g. expansion card
h. memory module
i. M.2 PCIe SSD
j. SD card reader
3. To remove the I/O panel:
a. Remove the screw that secures the I/O panel [1].
b. Slide and push toward the front from the computer [2].
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly 33