Installing The Bezel; Speaker; Removing Speaker - Dell OptiPlex 7050 Small Form Factor Owner's Manual

1. Follow the procedure in
2. Remove the cover.
3. To remove the front bezel:
a. Lift the tabs to release the front bezel from the computer [1].
b. Remove the front bezel from the computer [2].

Installing the bezel

1. Insert the tabs on the bezel into the slots on the computer.
2. Press the bezel until the tabs clicks into place.
3. Install the cover.
4. Follow the procedure in

Speaker

Removing speaker

NOTE: Depending on the configuration you order, you may see either of the heat sinks as shown in the image below.
1. Follow the procedure in
2. Remove the:
a. cover
14 Disassembly and reassembly
Before working inside your
After working inside your computer
Before working inside your
computer.
computer.