Installing The M.2 Pcie Ssd; Heat Sink; Removing Heat Sink Assembly - Dell OptiPlex 7050 Small Form Factor Owner's Manual

Installing the M.2 PCIe SSD

1. Insert the M.2 PCIe SSD to the connector.
2. Press the blue tab to secure the M.2 PCIe SSD.
3. Install the:
a. Optical drive
b. 2.5–inch drive assembly
c. bezel
d. cover
4. Follow the procedure in

Heat sink

Removing heat sink assembly

NOTE: Depending on the configuration you order, you may see either of the heat sinks as shown in the image below.
22 Disassembly and reassembly
After working inside your computer.