Environmental Conditions - Dell OptiPlex 7050 Small Form Factor Owner's Manual

Table 2. Product specifications (continued)
Features
M.2 form factors (all densities)
Performace
Latency (average sequential)
Components
Operating System Support
Supported Platforms
Power
Compliance
Certification and Declarationsµ
Endurance Rating
Temperature Specification
Shock
Vibration
Altitude (Simulated)
Product Ecological Compliance
Reliability

Environmental Conditions

Table 3. Temperature, Shock, Vibration
Temperature
1
Operating
2
Non-operating
3
Temperature Gradient
Operating
Specification
2280–S3–B-M
● Seq R/W: Up to 1350/290 MS/s
● QD4 4HB Random Read: 240K + IOPs
● QD4 4HB Random Write: 240K + IOPs
● Read 8.25 µ
● Write: 30 µ
● Intel 3D XPoint Memory Media
● Intel Controller and Firmware
● PCIe 3.0x2 with NVMe Interface
● Intel Rapid Storage Technology 15.2 or later
Windows 10 64 bit
7th generation or newer Intel Core processor based platforms
● 3.3V Supply Rail
● Active: 3.5 W
● Drive Idel :900mW to 1.2W
● NVMe Express 1.1
● PCI Express Base specifiation rev 3.0
● PCI M.2 HS Spec
UL, CE, C-Tick, BSMI, KCC, Microsoft WHQL, Microsoft
WHCK, VCCI
● 100 GB Writes per day
● Upto 182.3 TBW (Terabytes written)
● Operating: 0 to 70º C
● Non-Opearting: 10 to 85º C
● Temperature monitoring
1500 G/0.5msec
● Operating: 2.17 G (5–800Hz)
RMs
● Non-Operating: 3.13 G
● Operating: –1,000 ft to 10,000 ft
● Non-Operating: –1,000 ft to 40,000 ft
RoHS
● Uncorrectable Bit Error Rate (UBER): 1 sector per 10
read
● Mean Time Between Failure (MTBF): 1.6 million hours
M.2 2280 form factor
0–70º C
-10–85º C
30º C/hr (Typical)
M.2 Intel Optane Memory Module 16 GB
(5–800Hz)
RMS
15
bits
43