Removing And Installing Components; Recommended Tools; Removing The Cover; Installing The Cover - Dell OptiPlex 9010 Small Form Factor Owner's Manual

Removing and Installing Components

This section provides detailed information on how to remove or install the components from your computer.

Recommended Tools

The procedures in this document may require the following tools:
• Small flat-blade screwdriver
• Phillips screwdriver
• Small plastic scribe

Removing the Cover

1. Follow the procedures in
2. Pull up the cover-release latch at the side of the computer.
3. Lift the cover upward to a 45–degree angle and remove it from the computer.

Installing the Cover

1. Place the cover on the chassis.
2. Press down on the cover till it clicks into place.
8
Before Working Inside Your Computer .
2