Sharp FP-JM30E Operation Manual page 5

CAUTIONS CONCERNING
OPERATION
• Do not block the air intake or air outlet.
• Always operate the main unit in an
upright position.
• Do not move the main unit when it is in
operation.
• When moving the main unit, use the
handles on both sides.
• If the main unit is on easily damaged
flooring, an uneven surface, or thick-piled
carpet, lift it up when moving.
• Do not operate the main unit without the
filters properly installed.
• Do not wash and reuse the HEPA Filter.
Doing so will not improve filter
performance and can also cause electric
shock or operating malfunctions.
• Clean the exterior with a soft cloth only.
Do not use volatile fluids or detergents.
The main unit surface may be damaged
or cracked with Benzine, paint thinner or
polishing powder. In addition, the sensors
may malfunction as a result.
• Do not scrub the Pre-Filter hard during its
maintenance.
• Do not look directly into the UV Light.
UV Light meet the standards of IEC
(62471).
CAUTIONS CONCERNING
GLUE SHEET
• Handle the Glue Sheet with care. Avoid
children or pet from touching the sticky
surface.
• If the glue material adheres to hands or
clothing, wash them quickly and carefully
with soap and water after removing the
material by using cooking oil.
• Dust and dirt collecting on the sheet may
reduce the effectiveness of Glue Sheet.
• If no mosquitoes are collected on the
sheet, try changing the location of the
main unit.
• When disposal, dispose it according to
the local disposal laws and regulations.
• This is a completely safe adhesive type
product. No toxic ingredients.
INSTALLATION GUIDELINES
• Avoid locations where the sensors are
exposed to direct wind.
Doing so can cause the main unit to
malfunction.
• Avoid locations where furniture, fabrics,
or other objects can come in contact with
the main unit and interfere with the intake
and outtake of air.
• Avoid locations where the main unit
is exposed to condensation or drastic
changes in temperature. Appropriate
room temperature is between 0 – 35 ºC.
• Place the main unit on a level and stable
surface with sufficient air circulation.
When placed on heavy carpet, the main
unit may vibrate slightly.
• Avoid locations that generate grease or
oily smoke.
Doing so can cause the main unit exterior
to crack and the sensors to malfunction.
• The dust collecting ability of the main
unit is effective even when the main unit
is as close to 3 cm from the wall,the
surrounding walls and floor may get dirty.
Please place the main unit at a distance
from the wall.
The wall directly behind the air outlet may
become dirty over time. When using the
main unit for an extended period of time
at the same location, periodically clean
the walls adjacent to it.
FILTER GUIDELINES
• Follow the instructions in this manual for
proper filter care and maintenance.
EN-3