Table of Contents
Advertisement
IMPORTANT SAFETY INFORMATION
This symbol is used to call your attention to
hazards or unsafe practices which could result in
an injury or property damage. The signal word,
defined below, indicates the severity of the hazard.
The message after the signal word provides infor-
mation for preventing or avoiding the hazard.
Immediate hazards which, if not avoided, WILL
result in severe injury or death.
Hazards which, if not avoided, COULD result in
severe injury or death.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Read and understand all of the
instructions and safety information
in this manual before operating or
servicing this tool.
Failure to observe this warning
could result in severe injury or death.
Electric shock hazard:
This tool is not insulated. Do not use
this tool near energized electrical
lines.
Failure to observe this warning could
result in severe injury or death.
Greenlee Tools, Inc.
SAFETY
ALERT
SYMBOL
776 Ratchet ACSR Cutter
Keep hands away from closing
blades.
Pinch points:
Keep hands away from moving
parts.
Wear eye protection when using this
tool. Failure to wear eye protection
could result in serious eye injury
from flying debris.
• This tool is intended for two-handed opera-
tion. Maintain a firm grip on both handles during
operation.
• Do not cut guy wire or steel rod.
• Do not exceed the rated capacity of this tool.
• Inspect before use. Replace any worn or
damaged parts.
• Do not perform any service or maintenance other
than as described in this manual.
Failure to observe these precautions may result in
injury or property damage.
3
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Advertisement
Table of Contents
