Table of Contents
Advertisement
Assembly (continued)
Movable handle to stationary handle
16. Install movable handle assembly between the
stationary handle plates and align 3/8" pivot holes.
17. Install optional screw guide (46) onto shoulder screw
(13) to help guide the screw through components.
18. Lubricate shoulder screw (13) and install it through
the handle plates (5 and 8), handle plates (9 and
5) and spacer (26). Remove guide (46) if used and
install lock nut (23).
stationary handle
assembly
46
(optional)
13
movable handle
assembly
Greenlee Tools, Inc.
5
26
5
9
8
776 Ratchet ACSR Cutter
Cutter head to stationary handle
19. Install torsion spring (40) onto holding pawl (6)
and locate them between the handle plates on the
stationary handle (39) as shown.
2
4
47
(optional)
16
40
5
39
23
Ends of torsion spring should be
against handle and pawl as shown.
20. Install head assembly between handle plates on the
stationary handle and around the holding pawl (6).
21. Install optional screw guide (47) onto shoulder screw
(16) to help guide the screw through components.
22. Lubricate shoulder screw (16) and install it through
link (4), handle plate (5), torsion spring (40), holding
pawl (6), stationary blade (2), second handle plate (5),
cover (10) and spacer (19). Remove guide (47) if used
and thread on lock nut (24), but do not tighten.
10
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Note:
24
19
10
6
5
Advertisement
Table of Contents
