Emptying The Water Tank; Cleaning The Heat Exchanger - Kernau KFD 801 W Manual

5.2. Emptying the Water Tank

1. Pull the drawer cover and carefully
take out the tank.
2. Empty the water in the tank.
3. If there is lint accumulated on the
discharge cap in the tank, clean it
with water.
4. Refit the water tank.
IMPORTANT: Never remove the water tank when the programme is running.
The water condensed in the water tank is not suitable for human consumption.
IMPORTANT: DO NOT FORGET TO EMPTY THE WATER TANK AFTER
EACH USE.

5.3. Cleaning the Heat Exchanger

IMPORTANT: Clean the heat exchanger when you see the warning "Heat
Exchanger cleaning".
IMPORTANT: EVEN IF THE "HEAT EXCHANGER CLEANING WARNING
LED" IS NOT ON: CLEAN THE HEAT EXCHANGER AFTER EVERY 30 DRYING
PROCESSES OR ONCE A MONTH.
If the drying process is completed, open the loading door
and wait for it to cool down.
1. Open the kick plate cover as shown.
2. Unlock the exchanger cover by turning in the direction
shown with arrows.
3. Take out the exchanger cover as shown.
4. Clean the front surface of the exchanger as shown.
5. Fit the exchanger cover as shown.
6. Lock the exchanger cover by turning in the direction
shown with arrows.
7. Close the kick plate cover as shown.
EN
61