Cleaning And Care; Cleaning The Lint Filters - Kernau KFD 801 W Manual

IMPORTANT: Do not use industrial chemicals to clean your dryer. Do not use a
dryer that has been cleaned with industrial chemicals.

5.1. Cleaning the Lint Filters

IMPORTANT: DO NOT FORGET TO CLEAN THE LINT FILTERS AFTER
EACH USE.
To clean the lint filters:
1. Open the loading door.
2. Pull up the lint filters to remove it.
3. Open the outer filter
4. Clean the outer filter by your hands
or using a soft cloth.
5. Open the inner filter
6. Clean the inner filter by your hands
or using a soft cloth
7. Close the filters and fit the hooks
8. Place inner filter inside of outer
filter
9. Refit the Lint filter

5. CLEANING AND CARE

After the dryer has been used for a certain
period of time, if you encounter a layer that
will cause obstruction on the filter surface,
wash the filter with warm water to clean
the layer. Dry the filter thoroughly before
reinstalling it again.
EN
60