IMPORTANT:
Do not use industrial chemicals to clean your dryer. Do not use a dryer that has been cleaned with industrial
chemicals.
6.1. CLEANING THE LINT FILTER
IMPORTANT:
DO NOT FORGET TO CLEAN THE LINT FILTER AFTER EACH USE.
To clean the lint filter:
1.
Open the loading door.
2.
Pull up the lint filter to remove it.
3.
Use your hands or a soft cloth to clean the lint.
4.
Close and refit the lint filter.
6.2. EMPTYING THE WATER TANK
1.
Pull the drawer cover and carefully take out the tank.
2.
Empty the water in the tank.
3.
If there is lint accumulated on the discharge cap in the tank,
clean it with water.
4.
Refit the water tank.
IMPORTANT:
Never remove the water tank when the programme is running. The water condensed in the water tank is not
suitable for human consumption.
IMPORTANT:
DO NOT FORGET TO EMPTY THE WATER TANK AFTER EACH USE.
6. CLEANING AND CARE
After the dryer has been used for a certain period of time, if you
encounter a layer that will cause obstruction on the filter surface,
wash the filter with warm water to clean the layer. Dry the filter
thoroughly before reinstalling it again.
EN
55