Adjusting The Feet; Electrical Connection; Under Counter Installation - Kernau KFD 801 W Manual

1.7. Adjusting the Feet

• For the dryer to work with less noise and vibration, it must be stable and balanced
on its feet. Adjust the feed to ensure that the product is balanced.
• Rotate the feet to the right and to the left until the dryer is even and stable.
IMPORTANT: Never remove the adjustable feet.

1.8. Electrical Connection

ATTENTION: There is risk of fire and electric shock.
• Your dryer is set to 220-240 V and 50 Hz.
• The mains cable of the dryer is equipped with a special plug. This plug must be
connected to an earthed socket protected by a fuse of 16 Amperes as indicated
on the type plate. The fuse current rating of the power line where the outlet is
connected must also be 16 amperes. Consult a qualified electrician if you do not
have such an outlet or fuse.
• Our company cannot be held responsible for damages resulting from usage without
earthing.
IMPORTANT: Operating your machine at low voltage values will shorten the
service life and decrease the performance of your machine.

1.9. Under Counter Installation

• Leave at least 3 cm of space between the side and rear walls of the product and the
underside of the worktop when installing your product under a counter.
• Assembly / disassembly under the counter if neccessary must be done by authorized
service.
EN
49