Environmental Protection And Packaging Information; Packaging Information; Describing The Energy Label And Saving Energy; Energy Labelling - Kernau KFD 801 W Manual

9. ENVIRONMENTAL PROTECTION AND PACKAGING

9.1. Packaging Information

The packaging of this product is made of recyclable materials. Do not dispose of the
packaging, waste together with household or other waste. Instead, take it to a packaging
collection point defined by your local authority.

10. DESCRIBING THE ENERGY LABEL AND SAVING ENERGY

10.1. Energy Labelling

1. Trademark
2. Model
3. Energy Class
4. Annual Power Consumption
5. Noise During Drying
6. Dry Laundry Capacity
7. Cotton Cupboard Dry Cycle Time
8. Condensing Efficiency Class
9. Machine Technology

10.2. Energy Efficiency

• You should operate the dryer to full capacity, but
make sure that it is not overloaded.
• When the laundry is being washed, the spin
speed should be at the highest level possible. This
will shorten the drying time and reduce energy
consumption.
• Make sure that the same kinds of laundry are dried together.
• Please follow the recommendations in the user manual for programme selection.
• For air circulation, leave an appropriate clearance on the front and back sides of the
dryer. Do not cover the grills on the front side of the machine.
• Unless necessary, do not open the door of the machine when drying. If you have to
open it, do not keep it open for a long time.
• Do not add new (wet) laundry during the drying process.
• Hairs and lint that detach from the laundry and merge in the air are collected by the
„Lint Filters". Please make sure that the filters are cleaned before and after each use.
• For models with a heat pump, make sure that the heat exchanger is cleaned at least
once a month or after each 30 uses.
• During the drying process, the environment where the dryer is installed must be well
ventilated.
INFORMATION
EN
66