Safety Instructions; Electrical Safety - Kernau KFD 801 W Manual

This section contains safety instructions that will help protect you from risk of
personal injury or property damage. Failure to follow these instructions will void any
warranty.

1.1. Electrical Safety

• The appliance must not be supplied through an external switching device, such as
a timer, or connected to a circuit that is regularly switched on and off by a utility.
• Do not touch the power plug with wet hands. Always pull the plug to unplug the
product, otherwise, there will be risk of an electric shock.
• Connect the dryer to a grounded socket with fuse protection. The earth connection
must be installed by a qualified electrician. Our company cannot be held responsible
for damages/losses resulting from using the dryer without an earth connection as
required by local regulations.
• The voltage and the allowable fuse protection are indicated on the type plate. (For
the type plate, please see 3. Overview)
• Voltage and frequency values indicated on the type plate must be equal to the
mains voltage and frequency value in your house.
• Unplug the dryer when it is not used for an extended period, and before installation,
maintenance, cleaning and repair, otherwise, the dryer may get damaged.
• The plug socket must be freely accessible at all times after installation.
A damaged power cord / plug may increase the range or approaching current. A
damaged power cord / plug must be replaced. Keep that one.
To avoid the risk or fire or electric shock, do not use extension cords, multi sockets
or adapters to connect the dryer to mains power.

1. SAFETY INSTRUCTIONS

EN
43