Adjusting The Feet; Electrical Connection; Under Counter Installation - Kernau KFD 812 W User Manual

ATTENTION:
The hose must be connected in a manner that it cannot be displaced. If the hose comes out during water
discharge, there might be flooding in your house.
IMPORTANT:
he water discharge house must be installed at a height of 80 cm maximum.
IMPORTANT:
The water discharge hose must not be bent between the outlet and the product, folded or stepped over.

2.2. ADJUSTING THE FEET

• For the dryer to work with less noise and vibration, it must be stable and balanced on its feet. Adjust
the feed to ensure that the product is balanced.
• Rotate the feet to the right and to the left until the dryer is even and stable.
IMPORTANT:
Never remove the adjustable feet.

2.3. ELECTRICAL CONNECTION

ATTENTION:
There is risk of fire and electric shock.
• Your dryer is set to 220-240 V and 50 Hz.
• The mains cable of the dryer is equipped with a special plug. This plug must be connected to an earthed
socket protected by a fuse of 16 Amperes as indicated on the type plate. The fuse current rating of the
power line where the outlet is connected must also be 16 amperes. Consult a qualified electrician if
you do not have such an outlet or fuse.
• Our company cannot be held responsible for damages resulting from usage without earthing.
IMPORTANT:
Operating your machine at low voltage values will shorten the service life and decrease the performance of
your machine.

2.4. UNDER COUNTER INSTALLATION

• Leave at least 3 cm of space between the side and rear walls of the product and the underside of the
worktop when installing your product under a counter.
• Assembly / disassembly under the counter if neccessary must be done by authorized service.
EN
45