Enable/Disable Smart Notifications From Device; Creating A Route In Bryton Active - Bryton Aero 60 Troubleshooting Manual

5. Enable Active
6. Restart App
B. Enable/Disable Smart Notifications from Device*
1. In your device, navigate to: [Menu] > Settings > General > Bluetooth > [Notification]
2. Select On/Off
*Rider One/10/15 units require Smart Notifications to be enabled/disabled through the Bryton Active app. Please
see Bryton Active app smart notifications setup for instructions.
V. Creating a Route in Bryton Active
Please Ensure your Bryton Device is compatible with the Follow Track features and is also powered on and paired
with the Bryton Active app before beginning:
1. In the "Course" tab of the Bryton Active app, select "Plan Trip".
2. Determine the type of route you would like to take in the drop-down menu (MTB, Cycling, etc). *It is important
to determine the type of route before moving on. Once selected, it cannot be changed in the current route planning.
3. Select a starting point either by pressing a point on the map or by pressing the left (<) arrow button and inputting
an address.
4. Subsequent waypoints/end points can be added using the above method. If a point needs to be deleted, press
the left (<) arrow button and press the (X) button next to the waypoint. Waypoints can also be moved by holding
the list items and moving them up/down.
5. Once finished planning the trip, press the upload button in the top right corner of the app. Name the route (this
name cannot be modified later) and press upload.
6. If you are using a Rider 330/530 computer, perform a WiFi Data Sync on the device to synchronize this route.
Afterwards, please continue to Step 9. If you do not have a Rider 330/530, please continue to step 7.
7. In order to send this route to a compatible device, return to the "Course" tab and select "My Route". The
previously created route should appear in this list.
8. Press the desired route and then press the send to device icon in the top right of the app. (Please note that it
may take a few minutes to send the route to the device depending on size and complexity).
9. After sending the route to the device, it can be found in the device menu under "Follow Track">"View".
Pg. 8