Enable Strava Auto Sync - Bryton Aero 60 Troubleshooting Manual

Before enabling Strava/Komoot/RideWithGPS/Relive Auto Sync, please ensure that your device is compatible with
this feature and has already been synced and is currently connected with Bryton Active. Please contact
support_us@brytoncorp.net if you have any questions.
In order to enable Komoot/Strava/RideWithGPS/Relive Route Auto Sync, follow the instructions provided below:
1. Open the Bryton Active App and Navigate to the "Course" tab
2. Toggle Strava/Komoot/RideWithGPS/Relive
3. You will be prompted to login to your Strava/Komoot/RideWithGPS/Relive account. Input your login information
to proceed or choose "Create Account"
4. After logging in, select "Allow"
5. Komoot/Strava/RideWithGPS/Relive should now be enabled. Please note that it may take a few minutes for your
routes to populate in "My Routes"
6. If the routes do not appear, under my routes, press the filter button in the top right corner and select
All/Komoot/STRAVA/RideWithGPS/Relive
Only new rides will sync to Strava/Komoot/RideWithGPS/Relive, routes that have already been synced to Bryton
Active will not auto sync to Strava/Komoot/RideWithGPS/Relive and must be manually uploaded on their
respective sites. If new routes do not appear after an hour, please contact support_us@brytoncorp.net
*Please note: Enabling Strava Route Auto Sync will also enable Strava Auto Sync.
VIII. Enable Strava Auto Sync
In order to enable Strava Auto Sync, please follow the instructions below:
1. Open the Bryton Active App and click on the "Profile" tab
2. Select "3rd Party Account Link"
3. Select "Strava"
4. Enable "Strava Auto Sync"
5. If you have not already enabled "Strava Auto Sync", you will be prompted to log in. Follow the instructions in the
app and ensure that "Strava Auto Sync" is enabled afterwards.
After enabling "Strava Auto Sync", Bryton Active will only upload NEW rides to Strava (ones that are synced with
Bryton Active after this is enabled). If you would like to sync rides that are already saved on your device or if after
syncing device with Bryton Active the rides do not appear on Strava within an hour, please follow the instructions
below:
1. Using the original USB cable, plug the Bryton device into your PC.
2. In the main Bryton directory/folder, locate the file(s) that were unable to sync (these files will be in .fit format).
To easily locate the ride, sort files by Date.
3. After finding the file(s), navigate to https://www.strava.com/upload/select in your web browser
Pg. 10