Valor L1 Series Installation Manual page 4

Fit Conversion and Specifi cations Labels
1. Fit the conversion label with new specifi cations over
the corresponding specifi cations on the data plate
located at right hand side of the fi replace opening
on a plate marked Lighting/Operation Instructions.
2. Fit the label "This appliance was converted on... by..."
near the data label fi tted in 1.
Reinstall Fireplace Components
Reinstall the platform, fuel bed and window.
Adjust Air Shutter
1. Locate the aeration adjustment lever behind the ap-
pliance's front panel.
2. Adjust the aeration lever left and right as required
to achieve optimum fl ame picture. See Installation
Manual for details.
Open
Designed and Manufactured by / for
Miles Industries Ltd.
190 – 2255 Dollarton Highway, North Vancouver, B.C., CANADA V7H 3B1
Tel. 604-984-3496 Fax 604-984-0246
www.valorfi replaces.com
4
Closed
Complete Fireplace Reassembly
Replace the plinth support bracket, the plinth, side
doors and barrier screen.
Consult the fi replace's Installation Manual for full details
of the above steps.