Introduction; Eiconcard C Series; Eiconcard S Series - Eicon Networks Eiconcard C90 Installation Manual

Introduction

This booklet describes the Eiconcard C and S series interface cards.
All Eiconcards have been tested and found to comply with the
Electromagnetic compatibility, Safety and Network connection
regulations within the European Union, North America, and
other major territories. Read the regulatory information on
page 35 before installing and using your adapter.

Eiconcard C series

The Eiconcard C series are intelligent multi-protocol wide-area network
(WAN) interface cards for PCI-based workstations, offering connectivity
through V.24 and/or ISDN ports.
The Eiconcard C series allows you to connect using WAN protocols
such as X.25, Frame Relay, PPP, SDLC and HDLC, over leased lines,
dial-up lines or ISDN lines.
Model
Eiconcard C90
Eiconcard C91 S/T
Eiconcard C91 V2
V.24 port
The V.24 port supports line speeds of 64 kbps.
ISDN BRI port
The ISDN BRI port supports transfer rates of up to 128 kbps (over the
"D" channel or the "B" channels). It features an integrated S/T interface.

Eiconcard S series

The Eiconcard S series are intelligent multi-protocol wide-area network
(WAN) interface cards for PCI-based servers. These interface cards
feature a Very High Speed Interface (VHSI) port and an ISDN BRI port,
supporting line speeds of up to 2 Mbps (T1/E1) and 128 kbps
respectively.
CPU/Memory/Flash
16 MHz Motorola 68302
512 KB RAM
512 KB Flash
16 MHz Motorola 68302
512 KB RAM
512 KB Flash
50 MHz Motorola 850
8 MB SDRAM
Introduction
V.24 Ports ISDN BRI Ports
1
1
1
0
1
1
5