Regulatory information for Australia
• This customer equipment shall only be installed in a computer that requires
the use of a tool to gain access to internal parts (e.g., this customer
equipment must not be installed in a computer with a 'flip lid').
• Proper installation of the Eiconcard card requires that it is screwed to the
metal backplate of the computer. This ensures proper grounding, which is
necessary for safety purposes.
• This customer equipment may only be installed in host equipment where
there is at least 2 mm of air gap between the customer equipment and
adjacent boards (PCBs).
• Only compliant line cord set(s) shall be used as replacements with this
customer equipment.
Eiconcard
Warning: This customer equipment is to be installed and maintained
by service personnel as defined by AS/NZS 3260 Clause 1.2.14.3
Service Personnel. It may be hazardous if your computer is not
properly plugged in and grounded.
40
International regulatory information