Status Lights Eiconcard S91 S/T And S91 V2 - Eicon Networks Eiconcard C90 Installation Manual

Status Lights
Eiconcard S91 S/T and S91 V2
ISDN
port
VHSI
port

Status Lights Eiconcard S91 S/T and S91 V2

ISDN D-channel status
The D-channel controls the link to your ISDN
service provider.
Off ..........The line is not active. The cable may
not be connected.
Blinking...The line is active, but a link can't be
established. This may be a symptom
of incorrect configuration.
Steady ....The ISDN line is active and
operating normally.
ISDN B-channel status
The B-channels are used for the link to the
remote ISDN device.
Off .......... There is no connection.
Blinking .. Attempting to connect to the remote
device.
Steady.... The connection is active and able to
transmit data.
Configuration status
This status light illuminates when the
Eiconcard is being configured. This is most
useful when more than one Eiconcard is
installed in a computer.
Consult the documentation provided with the
configuration software for information about
this status light.
13