Introduction; About This Manual - Eicon Networks Eiconcard C90 Installation Manual

Introduction

The Eiconcard C9x is a PCI Plug-and-Play (PnP) card that offers
X.25 connectivity through a V.24 serial port at speeds of up to 64
Kbps, and/or through an ISDN BRI port (Eiconcard C91) at speeds
of up to 128 Kbps (over the "D" channel or the "B" channels). The
Eiconcard C9x is typically used for stand-alone or remote LAN
gateways.
The Eiconcard C9x also supports protocols such as SDLC,
Note
PPP, and Frame Relay.
All Eiconcards have been tested and found to comply with
the Electromagnetic compatibility, Safety and Network
connection regulations within the European Union, North
America, and other major territories. Read the regulatory
information on page 17 before installing and using your
adapter.
Hardware Features
The Eiconcard C9x features the following:
Eiconcard CPU/Memory/Flash
Eiconcard C90 15.36 MHz Motorola 68302
512 KB RAM / 512 KB Flash
Eiconcard C91 15.36 MHz Motorola 68302
512 KB RAM / 512 KB Flash
The High-Speed Interface (HSI) port, supports full duplex
communications over a V.24 interface at speeds of up to 64 Kbps.
The ISDN BRI port supports transfer rates of up to 128 kbps (over
the "D" channel or the "B" channels).

About this Manual

This guide describes how to install the Eiconcard C9x in any
computer with an IBM PC-compatible PCI bus. It covers the
following topics:
• Installing the card and connecting cables.
• Interpreting the status lights on the card.
For instructions on setting up communications protocols and using
applications, consult the documentation provided with your
networking software.
# of HSI Ports
1
1
Introduction
#of ISDN BRI Ports
N/A
1
5