Status Lights Eiconcard C90, C91 S/T, And C91 V2 - Eicon Networks Eiconcard C90 Installation Manual

Status lights
Eiconcard C90, C91 S/T, and C91 V2
ISDN
port
V.24
port
12
ISDN D-channel Status
(Eiconcard C91 S/T and C91 V2 only)
The D-channel controls the link to your ISDN
service provider.
Off .......... The line is not active. The cable may
Blinking .. The line is active, but a link can't be
Steady.... The ISDN line is active and
ISDN B-channel Status
(Eiconcard C91 S/T and C91 V2 only)
The B-channels are used for the link to the
remote ISDN device.
Off.......... There is no connection.
Blinking .. Attempting to connect to the remote
Steady ... The connection is active and able to
Configuration Status
This status light illuminates when the
Eiconcard is being configured. This is most
useful when more than one Eiconcard is
installed in a computer.
Consult the documentation provided with the
configuration software for information about
this status light.

Status lights Eiconcard C90, C91 S/T, and C91 V2

not be connected.
established. This may be a symptom
of incorrect configuration.
operating normally.
device.
transmit data.