Eicon Networks Eiconcard C90 Installation Manual page 36

FCC Part 68 notice
(for Eiconcards with ISDN ports only)
This equipment complies with Part 68 of the FCC rules and the requirements adopted by
the ACTA for new products released after July 23, 2002.
On the bottom of this equipment is a label that contains, among other information, a FCC
part 68 registration number or a product identifier in the format US: AAAEQ##TXXXX. If
requested, this information must be provided to the telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC part 68 rules and requirements adopted
by the ACTA. A compliant telephone cord and modular plug is provided with this product.
It is designed to be connected to a compatible modular jack that is also compliant.
The REN is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not ringing
in response to an incoming call. In most but not all areas, the sum of RENs should not
exceed five (5.0). To be certain of the number of devices that may be connected to a line,
as determined by the total RENs, contact the local telephone company.
For products approved after July 23, 2001, the REN for this product is part of the product
identifier that has the format US: AAAEQ##TXXXX. The digits represented by ## are the
REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is
separately shown on the label.
If this equipment causes harm to the telephone network, the telephone company will
notify you in advance that temporary discontinuance of service may be required. But if
advance notice isn't practical, the telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the operation of the equipment. If this happens, the telephone
company will provide advance notice in order for you to make the necessary modifications
in order to maintain uninterrupted service.
If trouble is experienced with this equipment, please contact us for repair and warranty
information. If the trouble is causing harm to the telephone network, the telephone
company may request you to remove the equipment from the network until the problem
is resolved.
This unit contains no user-serviceable parts.
Connection to party lines is subject to state tariffs. Contact the state public utility
commission, public service commission or corporation commission for information.
Facility Digital Service USOC
Interface code Reg. code Order code Jack Type
S/T 021S5 XD 6.0N N/A
Suppliers declaration of conformity
Eicon Network's declaration of conformity can be viewed at:
http://www.eicon.com/worldwide/about/declarations/default.htm
36 International regulatory information