Advertisement
For use with shower heads rated
at 5.7 L/min (1.5 gpm) or higher.
Read the instructions in this manual before beginning installation.
Save these instructions and refer to them for inspection,
maintenance, and troubleshooting information.
For questions regarding the operation, installation or maintenance of this product, visit bradleycorp .com or
call 800 .BRADLEY (800 .272 .3539) .
Product warranties and parts information may also be found under "Resources" on our website at
bradleycorp .com .
215-1674 Rev. F: ECO 19-03-024
© 2020 Bradley
Page 1 of 3
1/8/2020
Installation
S59-1005SR
Bradley Equa-Flo
Resistant Pressure-Balancing
Shower Valve
Table of Contents
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Supplies Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Rough-In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connect Valve And Adjust Valve Temperature . . . . . . . . . . 4
Attach Escutcheon And Handle . . . . . . . . . . . . . . . . . . . . . 4
Menomonee Falls, WI 53052 USA
800 BRADLEY (800 272 3539)
+1 262 251 6000
www.bradleycorp.com
HD Ligature
™
P.O. Box 309
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bradley Equa-Flo S59-1005SR
Summary of Contents for Bradley Equa-Flo S59-1005SR
- Page 1 For questions regarding the operation, installation or maintenance of this product, visit bradleycorp .com or call 800 .BRADLEY (800 .272 .3539) . Product warranties and parts information may also be found under “Resources” on our website at bradleycorp .com .
- Page 2 • Teflon Tape • Allen key wrenches • Screwdriver • 1/2" NPT Brass pipe plug • Adjustable wrench • 100% Silicone Sealant • Semi-Permanent Threadlocker • Security sealant (if required) • Silicone Grease (supplied) Bradley • 215-1674 Rev. F: ECO 19-03-024 1/8/2020...
- Page 3 * Dimension can be ±1/8" (119) "Back-to-Back" Installation SUPPLIES REVERSED Contact your Bradley Representative and ask for S45-2264 Back-to-Back Rotor Kit to swap out the rotor on the STANDARD INSTALL reversed side. COLD Bradley • 215-1674 Rev. F: ECO 19-03-024 1/8/2020...
- Page 4 Insert the 4 screws through the escutcheon and into the valve body . Tighten the screws, making sure that the escutcheon is flush with the wall or fixture and all 4 screws are tightened equally . Bradley • 215-1674 Rev. F: ECO 19-03-024 1/8/2020...
Need help?
Do you have a question about the Equa-Flo S59-1005SR and is the answer not in the manual?
Questions and answers