Rotor Removal & Replacement - Toro SnowMaster Manual

Rotor Removal & Replacement
(Figure 22)(Cont.)
Replacement (Cont.)
3. Install the rubber washer and bearing cap. Ensure
the rubber washer is properly positioned before
installing the bearing cap. Torque bolts to 40-60 in-
lbs. (4.6-7 Nm).
4. Install the bolts that go behind the rotor pulley.
Torque to 60-80 in-lbs. (7-9 Nm).
5. Install the rotor belt and belt cover as outlined in
"Belt Removal & Replacement."
Toro® - SnowMaster® Service Manual
CHASSIS
Table of Contents
3-9