Toro SnowMaster Manual page 38

CHASSIS
Main Frame
4
1. Frame
2. Belt Cover
3. Scraper Asm.
4. Skid Asm.
5. Lower Belt Cover
6. Upper Belt Cover
7. Bottom Ferrule (2x)
8. Top Ferrule (2x)
1
To assemble skids, item D, to correct height with tires
and scraper installed and product on lever surface.
Place a 0.2 in. thick spacer under scraper. Position the
skid so it is resting on the ground, tighten fasteners
while holding skid to prevent from rotating.
3-24 Table of Contents
8 2
1
3
6
5
3
Figure 73
4 1
2
Bottom ferrule must be assembled such that
body extends through frame. Top ferrule must be
assembled around bottom ferrule. Neither ferrule can
be pinched during assembly.
3
Torque to 25-35 in-lbs. (2.9-4 Nm)
Torque to 60-80 in. lbs. (7-9 Nm)
4
Toro® - SnowMaster® Service Manual
7 2
2
4
2