Transmission Removal - Toro SnowMaster Manual

Transmission Removal

Removal
1. Remove the upper shroud. Remove the bolt holding
the upper belt cover (Figure 35).
Figure 35
2. Tip blower forward resting the auger housing on a
protective mat. Remove the fasteners holding the
lower belt cover in place. Remove the cover (Figure
36).
Figure 36
Toro® - SnowMaster® Service Manual
3. Remove the tensioner spring.
4. Remove the wheels from the axles.
5. Slide the transmission to the right. Work the belt
over the pulley (Figure 37).
Figure 37
6. Remove the belt from the crankshaft pulley (Figure
38).
Figure 38
7. Slide the belt out.
Table of Contents
CHASSIS
3-13