Toro SnowMaster Manual page 34

CHASSIS
Jackshaft Replacement (Cont.)
Removal (Cont.)
7. Loosen the tensioner arm bolt. Move the tensioner
out of the way (Figure 60).
Figure 60
8. Slide the jackshaft support plate to the right and
remove (Figure 61).
Figure 61
3-20 Table of Contents
Replacement
1. Slide the jackshaft, thrust washer, bearing, and
bearing retainer into the chassis, through the hole
in the belt cover (Figure 62).
Figure 62
2. Slide the jackshaft support plate, thrust washer,
bearing, and bearing retainer onto the jackshaft
inside the housing (Figure 63).
Figure 63
Toro® - SnowMaster® Service Manual