Rotor Replacement - Toro 39901 Service Manual

Ribbed V-Belt Installation (continued)

Rotor Replacement

Rotor Removal
Drive System: Service and Repairs
g320499
1. Plastic Screw
When removing or installing the battery, do not allow the battery
terminals to touch any metal parts of the machine. Do not allow
metal tools to short between the battery terminals and metal parts
of the machine.
5. Install the battery into the machine.
1. Park the machine on a level surface and wait for all moving parts to stop.
When removing or installing the battery, do not allow the battery
terminals to touch any metal parts of the machine. Do not allow
metal tools to short between the battery terminals and metal parts
of the machine.
2. Lift the battery cover and remove the battery from the machine.
3. Remove the ribbed V-belt.
4. Remove the 3 screws securing the LH frame plate to the housing and LH
extension.
Figure 18
2. Screws
WARNING
WARNING
Ribbed V-Belt Replacement (page 5–4)
Page 5–6 60V MAX e21 Power Clear® Snow Thrower with
Flex—Force Power System® Service Manual
3438-775 Rev A