Motor Driver Installation (continued)
60v WPM Service Manual
3429-828 Rev A
g293757
6. Install the power head upper shroud. Secure with 8 (6 top-around the battery
cavity and 2 on the bottom rear) (1/4 x 1.0 inch) flange screws securing
the power head upper shroud to the lower shroud. Torque screws to 30 ±
3 in-lbs. (3.39 Nm).
g293756
7. Install the battery to the power head assembly.
Figure 90
Figure 91
Page 8–9
Motor Driver: Service and Repairs