Toro 20363 Service Manual page 77

Battery Door Removal (continued)
Battery Door Installation
60v WPM Service Manual
3429-828 Rev A
3. Remove the battery door by spreading apart, allowing the springs to fall
into upper shroud.
4. Remove the springs from the upper shroud assembly.
g295226
1. Insert the battery door back into the upper shroud assembly.
g295227
2. Insert a spring at a time, ensure the correct spring is for the correct side.
Long tail of the spring should be toward the inside of the shroud assembly.
Short side of the spring is inserted in the slot of the door pin.
Note: May need to spread door apart slightly in order to insert the spring in
the slot and over the door pin.
Figure 76
Figure 77
Page 7–27 Shrouds: Service and Repairs