Toro 20363 Service Manual page 63

Power Head Shroud Lower Installation (continued)
60v WPM Service Manual
3429-828 Rev A
g293766
6. Install the 2 (1/4 x 1.0 inch) flange screws at the base of the battery receiver
assembly. Torque screws to 30 ± 3 in-lbs. (3.39 Nm).
g293765
7. Install the motor driver. Connect the motor driver to the motor power
connection.
Figure 48
Figure 49
Page 7–13 Shrouds: Service and Repairs