Power Head Shroud Lower Installation (continued)
60v WPM Service Manual
3429-828 Rev A
g293759
10. Connect the 2 connectors from the battery receiver assembly to the motor
driver. Connect the negative first, then the positive.
g296708
1.
Negative
11. Install the 4 (T-20) torx screws to the motor fan shroud. Torque screws to
15–20 in-lbs. (1.7–2.26 Nm).
Figure 52
Figure 53
2.
Positive
Page 7–15
Shrouds: Service and Repairs