Toro 20363 Service Manual page 32

20363 with Personal Pace 22 inch Recycler Power Head Assembly Removal (continued)
20363 with Personal Pace 22 inch Recycler Power Head Assembly Installation
Power Head Assembly: Service and Repairs
g296528
12. Remove the pulley driver from the motor shaft.
g295231
13. Using an appropriate lifting device, support the motor and remove the last
(1/2 inch) motor mount bolt from the chassis.
1. Using an appropriate lifting device, support the motor. Install the 1 (1/2 inch)
motor mount bolts securing the motor to the chassis. Torque motor mount
bolts to 450 in-lbs. (50.8 Nm).
2. Install the pulley driver to the motor shaft.
Figure 11
Figure 12
Page 4–8 60v WPM Service Manual
3429-828 Rev A