Motor Installation (continued)
Motor Testing
60v WPM Service Manual
3429-828 Rev A
g293757
13. Install the power head upper shroud. Secure with 8 (6 top-around the battery
cavity and 2 on the bottom rear) (1/4 x 1.0 inch) flange screws securing
the power head upper shroud to the lower shroud. Torque screws to 30 ±
3 in-lbs. (3.39 Nm).
g293756
14. Install the battery to the power head assembly.
The motor should turn relatively easy with a pulsing motion. When the Ohm
testing connection leads, ohm readings should pulse when turning.
Figure 135
Figure 136
Page 10–17
Motor: Service and Repairs