Table of Contents
Advertisement
5.10 Using Barcode Reader
The 2D/1D Barcode Reader is optional for M133K Ultra-Rugged Tablet and is not re-workable by
the end user. To use this feature, please make sure the tablet PC is built-in barcode reader before
use, or contact our sales contact window for more details.
Note: Download the SDK from Winmate Download Center here.
>> M133K >> Development Kit or check the Driver CD which is shipped with the
tablet.
To enable the Barcode Reader:
1.
Open Hottab utility by pressing
Hottab Utility application.
2.
Tap on the Device ON/OFF button.
3.
Check the status color of the Barcode icon.
Item
Barcode
4.
Open the application where barcode reader will be displaying the scanned barcode.
5.
Trigger the barcode reader by pressing Fn3 function key.
Tap Disconnect button to stop the connection with Barcode Reader.
*To recover the connection, please tap on the button again to re-connect with Barcode Reader.
(Menu) Button located on the front panel or launching
Status
Description
Color
Barcode Reader is enabled. Reading will need to be
Orange
triggered manually thru Fn button.
White
Barcode Reader is disabled.
Chapter 5: Operating the Device
24
Advertisement
Table of Contents
