Table of Contents
Advertisement
5.3 Changing Touch Mode
The M133TG Ultra Rugged Tablet supports three built-in operating modes, for users to choose
under different usage scenarios, when any mode is chosen; the background of the icon will
become green.
Mode
In Hand/Rain mode the touchscreen rejects false inputs from liquid drops.
When the liquid is removed, the touchscreen accepts touch inputs from
bare fingertips.
Supports input by:
Hand/Rain
(Default)
In Stylus mode, the touchscreen supports inputs from the fine-tip passive
capacitive stylus (shipped with tablet).
Support input by:
Stylus
In Glove mode, the touchscreen supports inputs while the user is
operating the touchscreen with gloves on.
Supports input by:
Glove
Changing Touchscreen Mode in HotTab
1.
Open HotTab utility by pressing
HotTab utility application.
2.
Click on Devices ON/ OFF.
3.
Click on Touch Set
4.
Select the desired touch modes by tapping on the button.
5.
Now the touchscreen mode would behave as configured.
5.4 Using the Barcode Reader
The 2D/1D Barcode Reader is optional for M133TG Tablet PC and is not re-workable by the end
user. To use this feature, please make sure the tablet PC is built-in barcode reader before use, or
contact our sales contact window for more details.
Note:
Download the SDK from Winmate Download center.
>> M133TG >> Development Kit or check the Driver CD which is shipped with the tablet.
To enable the Barcode Reader:
1.
Open Hottab utility by pressing
Hottab Utility application.
2.
Tap on the Device ON/OFF button.
3.
Check the status color of the Barcode icon.
Rubber tip passive stylus
Bare fingertips
Fine-tip passive stylus with palm rejection
Rubber tip passive stylus
Bare fingertips
Glove
Rubber tip passive stylus
Bare fingertips
Menu Button located on the front panel, or launch
.
(Menu) Button located on the front panel or launching
Chapter 5: Operating the Device
Description
22
Advertisement
Table of Contents
