Download Print this page

Transportation, Storage And Disposal - Husqvarna LF 50 Operator's Manual

Advertisement

WARNING: Do not clean the air filter with
compressed air. This causes damage to the
air filter and the risk increases that you
breathe the dangerous dust.
1. Loosen the 2 screws on the air filter cover (A) and
remove the air filter cover.
B
A
2. Remove the foam filter element (B) from the air filter
cover.
3. Remove the paper filter element (C) from the air filter
housing (D).
4. Clean the air filter housing and the air filter cover
with a moist cloth.
5. Examine the air filter elements. Discard damaged air
filter elements.
CAUTION: Always replace a damaged
air filter, or the dust will go into the
engine and cause engine damage.
6. Tap the paper filter element against a hard surface
or use a vacuum cleaner to remove the particles.
CAUTION: Do not let the nozzle of the
vacuum cleaner touch the surface of the
paper filter element. Keep a small
distance. The sensitive surface of the
paper filter element becomes damaged if
objects touch it.
7. Clean the foam filter element with a solution of soap
and water.
Transportation
WARNING: Be careful during transportation.
The product is heavy and can cause injury
or damage if it falls or moves during
transportation.
14
D
C

Transportation, storage and disposal

8. Flush the foam filter element in clean water.
9. Compress the foam filter element to remove the
water and let the foam filter element dry fully.
CAUTION: Do not put oil on the foam
element of the air filter.
10. Install the air filter in the opposite sequence.
To do a check of the V-belt
WARNING: Do not operate the product
without the V-belt cover installed.
1. Stop the engine.
2. Remove the V-belt cover.
3. Examine the V-belt for damages and wear. Replace
the V-belt if it is necessary.
4. Examine the tension of the V-belt.
5. If the tension is not sufficient, do these steps:
a) Loosen the 4 bolts that hold the engine to the
bottom plate.
b) Move the engine rearward.
c) Make sure that the V-belt pulleys align and
tighten the 4 bolts.
6. Install the V-belt cover.
Transport wheels let you move the product manually for
shorter distances. For longer distances, lift the product
to move it or put the product on a vehicle.
CAUTION: Do not tow the product behind a
vehicle.
1107 - 003 - 03.04.2020

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Lf 60