Table of Contents
Advertisement
-
Allow warm dishes to cool down before putting them in the device.
-
Do not open the door longer then necessary.
-
Only set the temperature as low as needed. The ideal temperature in the fridge is 7° C.
It should be measured in the upper shelf, as far as possible in the front.
-
The device should be defrosted regularly.
-
Make sure the door sealing is in good order for the door to close properly.
M
A
AINTENANCE
ND
Cleaning and Care
For hygienic reasons, clean the interior and accessory parts regularly.
WARNING:
-
Always disconnect the plug or turn off/ unscrew the fuse before cleaning. Pull the plug and not the
cable.
-
Do not use steam cleaners for cleaning the device; moisture could enter electrical components.
Risk of electric shock! Hot steam could damage the plastic parts. The device must be dry before
restarting operation.
-
Essential oils and organic solvents, such as the juice of lemon or orange skin, butanoic acid or
cleaning agents containing acetic acid can damage plastic parts. Prevent contact of any part with
such substances. Do not use abrasive cleaning agents.
Pls. do as follows:
-
Remove all food and keep covered at a cool location.
-
Use warm water and a mild detergent for cleaning the interior (including rear side and bottom).
-
After thorough drying, restart operation.
WARNING:
-
Do not bend the cooling coils.
-
Do not use arenaceous abrasives.
Reverse the Bulb
Lamp specifications: 220-240V, max. 10W
To turn off the device, set the temperature control to setting 0 - OFF.
Disconnect the plug or turn off the fuse!
-
Remove the screw from the lamp cover.
-
Press on the lamp cover and remove to the back.
-
Replace defect illuminant.
-
Reattach the lamp cover and fasten the screw.
-
Reconnect the device and turn on.
Repairs
WARNING
Servicing of electric devices must be conducted by qualified experts only. Incorrect or improper repairs
constitute a risk for the user and will void the warranty!
What if . . . Troubleshooting
The design of the device ensures a trouble-free operation as well as a long life cycle. Nevertheless, if
any defect occurs during operation, please check if it is caused by improper operation.
The following problems can be solved by you by checking for the possible cause.
PROBLEM
POSSIBLE CAUSE
The device is
Is the plug securely connected to the mains?
not
working
Has the safety mechanism of the wall socket
properly or at
been triggered?
all
Is the temperature control properly set?
Is the place unqualified?
Do food items or shelves and/or drawers prevent
the door from closing properly?
Is the ventilation of the device hedged?
Loud
noise
Does the device not stand vertical or horizontal? Adjust the feet accordingly.
during
opera-
tion
C
LEANING
SOLUTION
Connect the plug properly to the socket, turn on
the fuse, and contact a technician if necessary.
Check the settings.
Check the ambient temperature.
Arrange the food or shelves and/or drawers
properly.
Clear the ventilation slits, install the device freely
Liquid flow sounds in the cooling circuit are
normal.
8
11/2012
Advertisement
Table of Contents
