Table of Contents
Advertisement
IDENTIFICATION OF COMPONENTS
SUPPORT U-BLOCK
The black or silver Stainless Steel support U-block
is used for installation on the rear block of the
MaxBlend Oxygen Blender. It secures the medical
device.
HARDWARE KIT
The following hardware is provided for the installation
of the Bracket Pro Serie 150 :
9 Four (4) Black Oxide Stainless Steel Flat Head
Phillips Screws 10-32 x 5/16"
Return to Table of Content
16
INSTALLATION GUIDE
BP150 UG 202108-01
www.technimount.com
Advertisement
Table of Contents
