Technimount System PRO 150 Series User Manual page 19

INSTALLATION OF THE BRACKET ONTO THE MAXBLEND OXYGEN BLENDER
(CONTINUED)
9. Tighten the four (4) screws.
CAUTION
9 Do not use electrical tools to install the screws.
9 Do not overtighten the screws.
10. The Maxtec MaxBlend Oxygen Blender is ready
for transport once properly inserted into its
bracket and the stretcher mounting system.
www.technimount.com
INSTALLATION GUIDE
BP150 UG 202108-01
Return to Table of Content
19