YILMAZ ACK 700 User Manual page 59

11. WARRANTY CONDITIONS
The warranty does not cover damages resulting from the following errors;
Failure to comply with the rules set out in the instruction to use,

Malfunctions arising from incorrect voltage and voltage fluctuations, lack of phase, voltage excess or low voltage

and incorrect electrical installation,
Problems caused by lack of grounding in electrical installation,

Failure as a result of not using air dryers in pneumatic products,

Faults that are caused by working area ambient temperature (temperature outside+4°C to +40°C),

 Problems arising from failure to clean the machine,
 Failure to make the compulsory maintenance specified in the user's Manual shall on time to Yılmaz Machinery or
Authorized Services,
Improper use or failure to use the machine for design purposes (outside the limits of the machine specified in the

user's manual or technical document (profile sizes, tools, etc.),
Use of machining tools and tool holders that are in poor quality and not suitable for the processed part,

Electrical - electronic parts failures (caused by incorrect voltage),

Problems that may occur as a result of incorrect data input from the operator or incorrect data from optimization

programs,
 Damage that may occur during relocation within the workshop or when the machine is moved to another facility,
 Natural disasters (lightning, fire, flood, etc.) or the water or snow contact to the environment in which the machine is
located or to the machine itself,
 Problems arising from failure to follow the instructions in the machine installation section in the user manual,
 Consumables worn in use (milling, saw, belt, machine coal, rollers, transparent protectors, protective plates) and
products that need to be changed during periodical maintenance (bearing, belt, oil, rollers, etc.) are not covered by
warranty.
58