Turbolock TL117 Manual page 24

Pairing to another smartphone
To pair a different smartphone with the lock, you must reset the lock using the steps below. Resetting the lock will revert the admin
passcode to the default and delete all user and keypad passcodes. After the new smartphone is paired to the lock, the previous
phone will no longer have Admin privileges.
For app operations, there is only one admin, but there can be multiple users.
Step 1. Press ' ' on the keypad, enter your current admin passcode, then press '
process:
Step 2. Press '5' followed by '
three times. After the voice confirmation ("Success"), the TL117 is now reset.
Step 3. Make sure you are within Bluetooth range (approx. 10m / 30 ft) and open the app, tap the
then select the lock. The app will begin pairing.
Step 4. Tap any confirmation messages as needed.
24 TURBOLOCK TL117
"To restore the default factory setting, please press 5."
' before the lock's backlight turns off. The TL117 will confirm "Restore factory settings," then flash
'. Voice navigation will guide you through the
icon on the lock list screen,