3.2 Product Parts 9.1 App Installation Section 4 9.2 Pairing Preparing for Use 9.3 Generating & Converting Keypad Passwords Section 5 Using the TL-400KBL Bike Lock Section 10 Resetting the Lock 5.1 Unlocking your Bike Lock 5.2 Locking your Bike Lock...
1.1 Introduction This user manual will guide you through the functions and usage of your TurboLock TL-400KBL Bike Lock. It is important that you follow all instructions and regard all notes that appear throughout this manual. Consult this manual before you attempt to use your lock.
The substances contained inside the battery present chemical risks to the environment. The recommended disposal for any TurboLock TL-400KBL Bike Lock at its end-of-life is to dispose of the entire unit at or through an e-waste recycling center, program, or facility. Local regulations and laws pertaining to the recycling and disposal of lithium-ion batteries and/or products containing them will vary according to country, state, and local governments.
If the chain plug is not properly inserted into the lock hole, pressing the lock button will cause the lock to beep and the indicator light to fl ash red to indicate incorrect operation. Section 3 Overview 3.1 Box Contents TL-400KBL Bike Lock x 1 User Manual x 1 Screwdriver x 1 Screws x 4 TL-400KBL Bike...
Step 4. After fully charging your bike lock, disconnect it from the USB cable. To turn the lock on, slide the Power Switch ON and use the screwdriver to fasten the Battery Compartment. USB Cable (Not included) Battery Compartment Step 2 Step 1 TurboLock TL-400KBL...
Make sure the bike lock has been fully charged and Power Switch is in the ON position. The TL-400KBL Bike Lock provides a variety of methods to unlock your bike. Each time the lock disengages to unlock the bike, the bike lock will beep and vibrate to indicate successful operation.
Using the Turbolock App • Before using the TurboLock app to unlock your bike lock, make sure you have installed the correct application and paired it successfully before with the TL-400KBL. For more information about the app installation and pairing, please refer to Section 9.
Step 5. Wait for the backlight to go out so that the new password successfully saves. Step 6. If desired, test the new password to confi rm the modifi cation was successful. • The password must be entered while the blue backlight is on. If it goes out, begin again at Step 1. TurboLock TL-400KBL...
Step 1. Use the keypad to enter the current Admin Password, then press the Unlock Button ‘ ’. The lock will engage. Step 2. Press ‘5’ and then the Unlock Button ‘ ’. The lock will stop emitting sound. TurboLock TL-400KBL...
The TurboLock app is compatible with most Android and iOS smartphones and grants full access to all of the bike lock’s features. With the app, you can unlock the bike lock, decide who receives passwords, specify when passwords can be used, track unlocking history, and more.
Page 14
Send keys to others via email or phone number. In order to access your ekey, you will need to download the Turbolock app to use it. If you are sent an ekey, you will need to download the Turbolock app to use it.
For users without Turbolock app access, the Turbolock admin can generate and send a 10 digit code that users can manually enter into the Turbolock to gain access. This 10 digit code can be revoked at any time by the Turbolock Admin.
’. The lock will engage. Step 2. Press ‘3’ and then the Unlock Button ‘ ’. The lock will reset. If the Admin Password is lost or forgotten, you may be able to reset it via the app. TurboLock TL-400KBL...
• When the low battery notifi cation starts, recharge the batteries as soon as possible. • The TL-400KBL Bike Lock is IP65 water-resistant, so it can withstand splashes and contact with water once properly after proper installation. • Do not let water and liquids get into the lock’s Battery Compartment.
Operation Time 2 seconds Operating Temperature -4°F ~ 158°F Operating Humidity 5-95% RH (non-condensation) Product Materials POM Plastic Body / Steel Wire Chain Connectivity Range ≤ 32 ft Dimension 3.19 x 2.56 x 0.91 in Net Weight 0.33 Ibs TurboLock TL-400KBL...
The battery is dead Recharge the battery. Make sure the Battery Compartment cable is fully connected to the cable inside the lock. The lock isn’t receiving power If it is properly connected and there is still a problem, contact customer service. TurboLock TL-400KBL...
Section 14 Warranty Your TurboLock TL-400KBL (“Product”) includes a One Year Limited Hardware Warranty (“Warranty”). The Warranty covers product defects in materials and workmanship under normal use. This Warranty is limited to residents of the United States and Canada only and is available only to original purchasers. This Warranty gives you specifi...
Page 21
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THE DURATION AND REMEDIES OF ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS EXPRESS LIMITED WARRANTY. TurboLock TL-400KBL...
Need help?
Do you have a question about the TL-400KBL and is the answer not in the manual?
Questions and answers