Page 1
In order to continue serving our customers and providing the best products, our product information including our user manuals may receive updates from time to time. Please check our website for the latest user manuals and product materials. Ver 2.0 01/15/21...
1.1 Introduction This user manual will guide you through the functions and usage of your Turbolock TL88 Fingerprint Bluetooth-enabled Smartlock. It is important that you follow all instructions and regard all notes that appear throughout this manual. Consult this manual before you attempt to use your lock.
The recommended disposal for any Turbolock TL88 at its end-of-life is to dispose of the entire unit at or through an e-waste recycling center, program, or facility. Local regulations and laws pertaining to the recycling and disposal of certain types of batteries and/or products containing them will vary according to country, state, and local governments.
Section 2 Package Contents & Overview 2.1 Contents TL88 Fingerprint Bluetooth-enabled Fingerprint x 1 Outside Knob x 1 Inside Knob x 1 Latch Assembly x 1 Wood Screws x 4 Mounting Screws x 2 - Mounting screws may already be inside the lock upon opening.
10 months. If needed, use a battery pack (not included) with the lock’s emergency power port (see Section 2.4 below). The time of the lock may reset after the batteries are replaced. Use the Turbolock app to unlock the TL88 and calibrate the time. 2.4 Usage Overview The easiest way to use the lock is by using your authorized fingerprint to open the lock directly.
Page 8
Reset fingerprint authorizations while in Bluetooth range (approx. 30’) Enable/Disable Passage mode while in Bluetooth range (approx. 30’) Unlock the TL88 while in Bluetooth range (approx. 30’) Share and manage eKeys from anywhere in the world View unlock records from anywhere in the world...
• For easier installation, have another person help to hold the door open or, if needed, the lock and/or parts. • Remove all parts of any old lock before installing the TL88. In some cases, the old strike plate and/or box may be used.
Page 10
(Fig. 4). Part 3 - Installing the Strike In most cases, the existing strike plate and setup can be used. If you wish to use the one included with your lock, skip to Section 4.1, Part 3. 7 TurboLock TL88...
2 x Wood app to test the lock to make sure it works before closing the door. See Section 6 for information on the fingerprint Screws setting and the information on the app. Outside Knob (Fig. 7) TurboLock TL88 8...
Installation (New) This section details installation steps needed if you are installing the TL88 on a door without a cutout. If you are using the TL88 to replace an old lock or if your door otherwise already has a cutout, please go back to Section 3.
Page 13
Part 2 - Disassemble the Lock Inside Knob Latch Assembly The TL88 comes already assembled. Before installation, release the inside screws and mounting screws to disassemble the lock into three main Outside Knob parts: Outside Knob x 1, Inside Knob x 1, Latch Assembly x 1.
Page 14
Step 2. Use a pencil to mark the horizontal center of the latch on the door frame. ” 3/ 8 ” 2 3/ 4 Step 3. Open the door again and extend the line over the edge of the door and inside the frame. 11 TurboLock TL88...
Page 15
Set the strike and strike box aside and drill two small holes at each center point. Step 9. Position the strike and strike box. Add the two remaining Wood Screws and use a screwdriver (not included) to secure them. TurboLock TL88 12...
Connector closing the door. See Section 6 for information on the 2 x Wood fingerprint setting and the information on the app. Screws Outside Knob (Fig. 7) 13 TurboLock TL88...
Section 5 Using the Passage Function With this function active, the TL88 can be used to open the door without requiring any authorizations by admin, which is allowed to open the lock only by pressing and turning the knob. USE WITH CAUTION. Remember to turn off the function when it is no longer needed. Do not leave this function on for extended periods of time.
To use your fingerprint to open the lock, you must first pair the TL88 with your smartphone via the Turbolock app. After pairing successfully, only authorized fingerprints can be used to open the lock. Until the lock is paired, there is no way to lock the TL88. To avoid security risks, pair the TL88 with the app immediately and set up authorized fingerprints (see Section 7.2 Pairing).
The TL88 is a Bluetooth-enabled lock. You must be within standard Bluetooth range (30 ft. / 10 m) to engage the lock through the app. This includes pairing the app to the TL88 and using the app to lock/unlock the TL88.
7.3 App Usage From the Devices list screen , tap to gain access to more options . Or tap the (Fig. 21) (Fig. 22) name of lock to enter Main Interface screen (Fig. 21) (Figs. 23 and 24) 17 TurboLock TL88...
• App content subject to change without notification. • App content may differ depending on operating system. The TL88 is a Bluetooth-enabled lock. You must be within standard Bluetooth range (30 ft. / 10 m) to engage the lock through the app.
7.5 Managing User access (E-Keys) User access is generated on the Turbolock app by the Admin and sent to a user. That user must install the Turbolock app on their smartphone and register for a Turbolock account. E-Keys can be permanent or have time restrictions, at the Admin’s discretion.
Step 2. Set the User name first, then tap ‘Start finger setting‘ to continue process (Fig. 29) Step 3. Follow the voice prompts to add a fingerprint. After successful add, the TL88 will beep and the LED indicator will flash green (Fig.
Step 2. The LED indicator on the TL88 will flash green and the lock will beep. The TL88 is now reset. To reset the TL88 through the app, you must be within standard Bluetooth range (approx. 33 ft. / 10 m). It cannot be done remotely.
• After cleaning with a cleaner or detergent, wipe off any residue using a second non-abrasive cloth. Be sure to dampen the cloth with clean (purified) water. • The TL88 meets IP65 water-resistance. It can withstand splashes and contact with water once properly installed; however, do not submerge the lock.
Page 26
The lock on the door has come loose. If none of the above information resolves your issue, please visit our website at www.turbolock.com or contact customer service at 855-850-8031. 23 TurboLock TL88...
Warranty services are provided by TurboLock Warranty Pro (“WP”). If a hardware defect arises and a valid claim is received within the Warranty Period, at its option and to the extent permitted by law, WP will: (1) repair the hardware defect by using new or...
Page 28
THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THE DURATION AND REMEDIES OF ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS EXPRESS LIMITED WARRANTY. 25 TurboLock TL88...
Need help?
Do you have a question about the TL88 and is the answer not in the manual?
Questions and answers